Microfiber towel has strong decontamination and water absorption function

March 25, 2022

[China Towel Industry Network] Microfiber towel is made of imported looms. The surface of the warp knitted fabric is uniform, compact, soft and elastic. It has strong decontamination and water absorption functions. There is no harm to the surface to be wiped, no cilia falling on cotton fabrics; easy to wash, use, compared with traditional cotton towels, it has six characteristics, it is worthy of our use.

High water absorption: The ultra-fine fiber uses the orange-petal skill to divide the filaments into eight petals, which increases the surface area of the fiber and increases the porosity in the fabric. The capillary wicking effect enhances the water absorption effect. Rapid water absorption and rapid drying become its obvious characteristics.

Strong decontamination: The fineness of microfibers with a diameter of 0.4μm is only 1/10 of that of silk. The extra cross section can capture dust particles as small as a few microns more effectively. The effect of decontamination and degreasing is very obvious.

No hair removal: high-strength synthetic fiber filaments, not easy to crack, together with the fine weaving method, no spinning, no looping, the fiber is not easy to fall from the towel surface. It is used to make wipes and wipes. It is suitable for wiping the surface of bright paint, plating surface, glass, surface and liquid crystal screen. It can clean the glass during the process of car filming, and it can reach the effect of very ambiguous film.

Longevity: Due to the high strength and high resistance of the microfiber, its service life is more than 4 times that of the normal towel life. It is still invariable after repeated washing. Together, the polymer fiber will not be like cotton fiber. The onset of protein hydrolysis, even if it is not exposed after use, will not be mildew, phlegm, and has a long life.

Easy to clean: Usually when the towel is used, it is a natural fiber towel. The dust, grease, dirt and other surfaces on the surface of the object are directly absorbed into the fiber. After use, it remains on the edge of the fiber. It is not easy to eradicate. Even after a long time, Will become hard and lose flexibility, affecting the use. The microfiber towel absorbs the dirt between the fibers (instead of the inside of the fiber), and the fiber has a high fiber density and a high density, so the adsorption capacity is strong, and it is only necessary to clean with water or a little detergent after application.

No fading: dyeing process uses TF-215 and other dyes for ultra-fine fiber materials. Its retarding, transferability, high-temperature dispersibility, and color-eliminating policies all meet the severe standards of exporting international markets. The benefits of discoloration make it impossible to bring about decolorization and pollution at the time of cleaning the surface of the article.

vorig

Neem contact op

Author:

Mr. John

E-mail:

kevin@betterclean.net

Phone/WhatsApp:

+8613901571758

populaire producten

Nieuws